How to fix VAG COM error code 00287 and 00270 qith symptoms, causes, and solutions

 How to fix VAG COM error code 00287 and 00270

In this article we will explore to fix VAG COM error code 00287 and 00270 and also understand its symptoms, causes, and solutions.

VAG COM Error Code 00287

Error Code 00287 - ABS Wheel Speed Sensor Rear Right (G44): Electrical Fault in Circuit

If you've used VAG COM to diagnose your Volkswagen, Audi, Seat, or Skoda vehicle and encountered error code 00287, this guide will help you understand its symptoms, possible causes, and solutions.

Symptoms:

- When this error occurs, you may see the message "00287 - ABS Wheel Speed Sensor Rear Right (G44): Electrical Fault in Circuit" on the display.

Possible Causes:

1. Open Circuit in Wiring from/to ABS Wheel Speed Sensor Rear Right (G44).

2. ABS Wheel Speed Sensor Rear Right (G44) is faulty.

Possible Solutions:

To resolve the 00287 fault code, consider the following steps:

1. Check Wiring:

Inspect the wiring running from and to the ABS Wheel Speed Sensor Rear Right (G44) for any signs of an open circuit. Look for loose connections, damaged wires, or corrosion.

2. Check ABS Sensor:

 Evaluate the ABS Wheel Speed Sensor Rear Right (G44) for any faults or damage. Ensure it's securely in place and functioning correctly.

Special note:

- If the error message reads "00287 - ABS Wheel Speed Sensor Rear Right (G44): Mechanical Malfunction," the possible causes and solutions differ:

   - Causes: Excessive air gap between ABS Wheel Speed Sensor Rear Right (G44) and rotor, short circuit in wiring, or a faulty ABS Wheel Speed Sensor Rear Right (G44).

   - Solutions: Inspect the installation of ABS Wheel Speed Sensor Rear Right (G44), check wiring for shorts, and verify the sensor's functionality.

VAG COM Error Code 00270

Error Code 00270 - Solenoid Valve 7 (N94): Open or Short to Ground

If you've used VAG COM and encountered error code 00270, this guide will help you understand its symptoms, possible causes, and solutions.

Symptoms:

- When this error occurs, you may see the message "Solenoid Valve 7 (N94): Open or Short to Ground" on the display.

Possible Causes:

1. Wiring/Connectors from/to Solenoid Valve 7 (N94) are open or have a short to ground.

2. Solenoid Valve 7 (N94) is faulty.

Possible Solutions:

To resolve the 00270 fault code, consider the following steps:

1. Check/Repair Wiring:

Examine the wiring and connectors associated with Solenoid Valve 7 (N94). Look for open circuits or shorts to ground. Ensure all connections are secure.

2. Check/Replace Solenoid Valve:

 Inspect Solenoid Valve 7 (N94) for any faults or damage. If necessary, replace the solenoid valve.

3. See Measuring Value Blocks (MVB):

 Use the Measuring Value Blocks to further diagnose and evaluate the system's performance.

Perform Output Test: Conduct an output test to assess the functionality of the solenoid valve.

By following these steps and addressing any identified issues, you can diagnose and potentially resolve error code 00270 or 00287 in your vehicle, ensuring proper system operation.

Read Also - fix VW 01314 / Volkswagen  Error Code 01314

Read Also - fix VAG COM Error Code 00546 and 00290

Read Also - fix Trouble Code 00457 and 00473